9903.81.85—Section 232 Steel
Overlay rate
The duty provided in the applicable subheading + 25%
Stacks on top of the base HTSUS rate of the product
Tandom · Duty calculator
See this overlay in a real duty stack
Pick a covered 10-digit code below, plug in country and invoice value, and Tandom will compute the full landed cost with this overlay stacked on the base rate.
Plain-English explanation
HTS 9903.81.85 is a Chapter 99 steel derivative tariff modification under Section 232 Steel. When a base 10-digit code falls within this provision's scope, it imposes the duty provided in the applicable subheading + 25% on top of the underlying base duty. It applies only to imports from MX. It expired on 2026-04-05 and is no longer enforced for new entries. It currently covers 755 base HTS codes in Tandom's catalog.
Rate stack at entry
Description
Authoritative scope text from the U.S. Harmonized Tariff Schedule
Steel articles of Mexico enumerated in U.S. note 16 to this subchapter, where the steel was melted and poured in a country other than the United States, Mexico or Canada
How to use this provision
When and how this overlay shows up at entry
Chapter 99 provision 9903.81.85 is a tariff modification — it doesn't classify a product on its own. When a base 10-digit HTS code falls within this provision's scope and a shipment matches the country and date conditions, the broker declares the base code at entry, then references 9903.81.85 on a separate line so its rate stacks on top.
Worked example
How this overlay applies to a real covered code
Imagine an importer files a $10,000.00 shipment of 7206.10.00.00 (ingots) from a country in scope. The overlay rate of The duty provided in the applicable subheading + 25% stacks on top of the base HTSUS rate of Free.
Base duty
$0.00
Free × $10,000.00
This overlay
$2,500.00
25% × $10,000.00
Total duty
$2,500.00
Plus AD/CVD if applicable
Opens the Tandom calculator with HTS 7206.10.00.00 and $10,000.00 pre-filled — add a country to compute the full landed cost.
Target countries
Applies only to imports from these countries
Affected base HTS codes(755)
Showing the first 50 of 755 covered codes (alphabetical).
7206.10.00.00IngotsFree7206.90.00.00OtherFree7207.11.00.00Of rectangular (including square) cross section, the width measuring less than twice the thicknessFree7207.12.00.10Having a width measuring less than four times the thicknessFree7207.12.00.50Having a width measuring at least four times the thicknessFree7207.19.00.30Of circular cross sectionFree7207.19.00.90OtherFree7207.20.00.25Having a width measuring less than four times the thicknessFree7207.20.00.45Having a width measuring at least four times the thicknessFree7207.20.00.75Of circular cross sectionFree7207.20.00.90OtherFree7208.10.15.00PickledFree7208.10.30.00Of a thickness of 4.75 mm or moreFree7208.10.60.00Of a thickness of less than 4.75 mmFree7208.25.30.00Of high-strength steelFree7208.25.60.00OtherFree7208.26.00.30High-strength steelFree7208.26.00.60OtherFree7208.27.00.40“Advanced” or “ultra” of a kind described in statistical note 4 to this chapterFree7208.27.00.45OtherFree7208.27.00.60OtherFree7208.36.00.30High-strength steelFree7208.36.00.60OtherFree7208.37.00.30High-strength steelFree7208.37.00.60OtherFree7208.38.00.15High-strength steelFree7208.38.00.30With untrimmed edgesFree7208.38.00.90OtherFree7208.39.00.20“Advanced” or “ultra” of a kind described in statistical note 4 to this chapterFree7208.39.00.25OtherFree7208.39.00.30With untrimmed edgesFree7208.39.00.90OtherFree7208.40.30.30Of a thickness exceeding 10 mmFree7208.40.30.60OtherFree7208.40.60.30Of a thickness less than 3 mmFree7208.40.60.60OtherFree7208.51.00.30Universal mill plateFree7208.51.00.45Of high-strength steelFree7208.51.00.60OtherFree7208.52.00.00Of a thickness of 4.75 mm or more but not exceeding 10 mmFree7208.53.00.00Of a thickness of 3 mm or more but less than 4.75 mmFree7208.54.00.00Of a thickness of less than 3 mmFree7208.90.00.00OtherFree7209.15.00.00Of a thickness of 3 mm or moreFree7209.16.00.40“Advanced” or “ultra” of a kind described in statistical note 4 to this chapterFree7209.16.00.45OtherFree7209.16.00.60OtherFree7209.16.00.70AnnealedFree7209.16.00.91OtherFree7209.17.00.40“Advanced” or “ultra” of a kind described in statistical note 4 to this chapterFreeRelated Chapter 99 codes(24)
Other Section 232 Steel provisions in Tandom's catalog
9903.40.05Radial tires of a kind used on motor cars (other than racing cars), station wagons, sport utility vehicles, vans and on-the-highway light trucks (provided for in subheading 4011.10.10 or 4011.20.10)9903.40.10Other tires of a kind used on motor cars (other than racing cars), station wagons, sport utility vehicles, vans and on-the-highway light trucks (provided for in subheading 4011.10.50 or 4011.20.50)9903.74.01Medium- and heavy-duty vehicles as provided for in subdivision (b) of U.S. note 38 to this subchapter.9903.74.02Buses and other vehicles classified in HTSUS heading 8702 as provided for in subdivision (c) of U.S. note 38 to this subchapter.9903.74.03Medium- and heavy-duty vehicles, as provided for in subdivision (d) of U.S. note 38 to this subchapter.9903.74.05Articles as provided for in subdivision (e) of U.S. note 38 to this subchapter.9903.74.06Articles as provided for in subdivision (f) of U.S. note 38 to this subchapter.9903.74.07Medium- and heavy-duty vehicles, as provided for in subdivision (g) of U.S. note 38 to this subchapter.9903.74.08Medium- and heavy-duty vehicle parts, as provided for in subdivision (i) of U.S. note 38 to this subchapter.9903.74.09Medium- and heavy-duty vehicle parts, as provided for in subdivision (j) of U.S. note 38 to this subchapter.9903.74.10Articles as provided for in subdivision (k) of U.S. note 38 to this subchapter9903.74.11Section 232 MHDV Non-Stacking — articles in Note 38(i) auto parts scope that are NOT parts of medium- or heavy-duty vehicles. 0% additional duty. Proclamation 10984.9903.76.01Softwood timber and lumber products provided for in subdivision (b) of U.S. note 37 of this subchapter9903.76.02Upholstered wooden furniture products provided for in subdivision (d) of U.S. note 37 of this subchapter9903.76.03Completed kitchen cabinets and vanities and parts of kitchen cabinets and vanities provided for in subdivision (f) of U.S. note 37 of this subchapter9903.76.04Articles as provided for in subdivision (g) of U.S. note 37 of this subchapter9903.76.20Wood products of the United Kingdom as provided for in subdivisions (d) and (f) of U.S. note 37 of this subchapter9903.76.21Wood products of Japan as provided for in subdivisions (d) and (f) of U.S. note 37 of this subchapter9903.76.22Wood products of the European Union as provided for in subdivisions (d) and (f) of U.S. note 37 of this subchapter9903.76.23Wood products of South Korea as provided for in subdivisions (d) and (f) of U.S. note 37 of this subchapter9903.78.01Section 232 Copper — 50% ad valorem on copper content of semi-finished copper products (Note 35: headings 7406-7413) and copper derivative products (Note 36(b): headings 7415, 7418, 7419, plus 8544.42/49)9903.78.02Section 232 Copper — non-copper content remainder of articles classifiable under Notes 35/36(b)9903.79.01Semiconductor articles as provided for in subdivisions (a) and (b) of U.S. note 39 to this subchapter.9903.79.02Articles as provided for in subdivision (c) of U.S. note 39 to this subchapter.Frequently asked questions
What is HTS 9903.81.85?
HTS 9903.81.85 is a Chapter 99 tariff modification under Section 232 Steel. It is not a product classification — it's an overlay code that stacks on top of a base 10-digit HTS code at entry. Scope text: Steel articles of Mexico enumerated in U.S. note 16 to this subchapter, where the steel was melted and poured in a country other than the United States, Mexico or Canada
What rate does HTS 9903.81.85 apply?
The provision states: "The duty provided in the applicable subheading + 25%" That rate stacks on top of whatever the base HTSUS rate is for the underlying 10-digit code. Use the Tandom calculator to compute the full landed cost for any covered product.
Which countries does HTS 9903.81.85 apply to?
9903.81.85 applies only to imports from: MX.
Is HTS 9903.81.85 currently active?
No — 9903.81.85 expired on 2026-04-05 and is no longer enforced for new entries.
How do I use HTS 9903.81.85 when filing?
9903.81.85 doesn't classify a product on its own. When a base 10-digit HTS code falls within this provision's scope and a shipment matches the country and date conditions, the broker declares the base code at entry, then references 9903.81.85 on a separate line so its rate stacks on top. It currently covers 755 base HTS codes in Tandom's catalog.
Source
Authoritative citation that established this provision
;proc11021-supersede-2026-04-21
Learn more
Tandom guides relevant to this code
How Chapter 99 tariff layers stack on a single entry
How to read, order, and report Chapter 99 HTS codes alongside the base classification on a US entry summary in 2026. The full stacking ladder for brokers and compliance teams.
Open resource
How to calculate US import duties
A working guide to the inputs, the layers, and the math behind a US entry summary in 2026. Written for brokers, forwarders, and importer compliance teams.
Open resource
Section 232 steel, aluminum, and copper duties in 2026
What changed April 6, 2026, what stayed the same, and how to file a steel, aluminum, or copper line in ACE without leaving duty exposure on the table.
Open resource
File an IEEPA tariff refund through CAPE in 2026
Step-by-step CAPE Declaration filing for IEEPA refunds: who can file, eligible entries, the 9,999-entry CSV, ACE setup, and the 60 to 90 day refund window.
Open resource
Wire the Tandom Duty Calculator API into a TMS or broker software
Drop the Tandom Duty Calculator API into a TMS, broker software, or in-house ERP. Code samples, the response shape, and ACE reporting order, in 2026.
Open resource
Section 301 China tariff exclusions in 2026
What the 178 active Section 301 exclusions cover, how to claim 9903.88.69 on an entry, and what changes when the November 10, 2026 deadline passes.
Open resource